Download untuk RE360(FR)
IMPORTANT:
Model and hardware version availability varies by region. Please refer to your TP-Link regional website to determine product availability.
Vx.0=Vx.6/Vx.8/Vx.9(eg:V1.0=V1.6/V1.8/V1.9)
Vx.x0=Vx.x6/Vx.x8/Vx.x9 (eg:V1.20=V1.26/V1.28/V1.29)
Vx.30=Vx.32/Vx.33 (eg:V3.30=V3.32/V3.33)
Vx.0=Vx.6/Vx.8/Vx.9(eg:V1.0=V1.6/V1.8/V1.9)
Vx.x0=Vx.x6/Vx.x8/Vx.x9 (eg:V1.20=V1.26/V1.28/V1.29)
Vx.30=Vx.32/Vx.33 (eg:V3.30=V3.32/V3.33)
FAQs
- How to Log In to the TP-Link Range Extender Web Management Page
- How to Configure Your TP-Link Range Extender to Access Point Mode
- How to Update Your TP-Link Extender Firmware: Three Methods
- TP-Link Range Extender Not Connecting to Router: Troubleshooting Guide
- How to Place Your TP-Link Wi-Fi Extender for the Best Signal and Performance
- What should I do if I fails to login web interface of TP-Link Range Extender?
- How to configure my range extender via web GUI (new logo)
- How to set access control on my range extender (new logo)
- How to configure wireless network on the range extender (new logo)
- Why I cannot access range extender by using the domain name?
- How to log into the Web GUI of my Range Extender via IP address or domain name
- How to check network status of the range extender (new logo)
- How to connect your wireless devices to the range extender via WPS as AP Mode (new logo)
- How to adjust Wi-Fi coverage of TP-Link Range Extender (new logo)
- Most frequently asked questions about TP-Link range extenders
- How to check whether my Range Extender is using the same SSID with my Router
- What should I do if my range extender does not extend the Wi-Fi coverage?
- Different Application Scenarios to use the TP-Link dual band range extender
- Why is my main router’s wireless password changed after using WPS to setup the Range Extender?