Omada Wireless Bridge 5 GHz 867 Mbps Indoor/Outdoor Access Point
- 802.11ac for up to 867 Mbps on the 5 GHz wireless data rate.*1
- Ideal for long-range wireless transmission up to 1 km.*2
- Auto-pairing and agile LEDs for efficient deployment.
- 3× Gigabit Ethernet ports for more high-speed IP camera connections.*6
- Supports Omada SDN for remote and centralized management.
- IP65 weatherproof enclosure and 6kV lightning protection ensure all-weather suitability.*3
- Supports Passive PoE for flexible deployment (adapter included).
Long-Distance PtMP & PtP Wi-Fi Transmission, Perfect for Multiple Scenarios
Omada Professional Outdoor Wireless Bridge Solution
-
Up to 0.62mi (1km) Distance
Ideal for setting up networks in remote locations.
-
Up to 70° Beamwidth for Wider Deployment
One central AP covers more distributed APs and cameras, eliminating the need for multiple central APs.
*EAP211-Bridge: 70° x 70° beamwidth; EAP215-Bridge & EAP115-Bridge: 35° x 35°
-
Three Ports for More Devices
Connect more cameras and devices without an extra switch.
-
IP65 Weatherproof for Outdoor Use
Durable performance with IP65 rating and operating range of -40°F to 158°F (-40°C to 70°C).
-
Standalone or Omada SDN Mode
Flexible dual modes for batch deployment and remote management via the Omada app or Web UI.
Point-to-Point (PtP) Network Expansion or Remote Camera Monitoring
Outdoor PtP (Point-to-Point) Wi-Fi Connection
Extend Wi-Fi to Additional Buildings
Extend your home network or Wi-Fi to your shop, barn, garage, farm, storehouse, guesthouse, or RV.
Extend Wi-Fi to Additional Offices
Provide 550Mbps bandwidth within a 328ft (100m) range using the EAP215-Bridge KIT or EAP211-Bridge KIT.*
Elevator PtP Wi-Fi for Surveillance
Record real-time video to an NVR with virtually no hardwiring required
*Tested in an open area without obstacles on a sunny day. Actual range and throughput depend on the transmission power and environmental factors such as wireless interference, obstacles, weather, etc.
Point-to-Multipoint (PtMP) Connections with Higher Beamwidth for Distributed Cameras
Outdoor PtMP (Point-to-Multipoint) Wi-Fi for Surveillance
Parking Lots
Remotely connect cameras to
reduce crime and accidents
Farms / Orchards
Remotely connect cameras to protect
your property
Construction Sites
Rapidly deploy wireless networks to remotely monitor construction progress in real time or manage logistics.
Easy Setup and Installation
-
Auto- PairingAuto-Pairing to
Reduce Setup Time*Auto pairing works for the original kit. Three or more bridges require manual setup.
-
Signal Strength LEDsLED Signal Indicator
for Easy Alignment -
Pole/Wall Mount for Easy Installation
*Pole mounting accessories are included, while the bracket for wall mounting and pole mounting requires purchase separately.
-
Standalone Mode
Simple Setup for Individual Scenarios
1. Power on both bridges and connect one to the network via cable to make it the main bridge. 2. Set up the main bridge using the Omada App or Web UI, then configure the sub-bridge step by step. 3. Deploy the sub-bridge at the remote location, align it using the signal LED, and optimize with the app if needed. -
Works with Omada SDN
Faster Batch Deployment and Remote Management
Omada bridges integrate with Omada SDN for centralized management and remote access, enabling faster batch deployment of multiple bridge pairs, using batch provisioning. *Omada SDN centralized and remote management requires the use of Omada SDN controller. Batch Provisioning Centralized and Remote Management
Designed for Outdoors
Resistance
Dedicated Hardware Design
Outdoor Ready
· IP65 Weatherproof
· 6kV Lightning
· Wind Resistant
· -40~70°C (-40~158°F) Operating Temperature
Stable HD Video Transmission on 5 GHz
· EAP215-Bridge & EAP211-Bridge: 867 Mbps
· EAP115-Bridge: 300 Mbps
224 mm
60 mm
· Pole Mounting (Accessories included)
· Wall Mounting (Optional)
Signal Strength LEDs
LAN LEDs
System LED
Waterproof Cover
79 mm
Reset Button
Grounding Terminal
Passive PoE In
(Power adapter included in the box)
12V DC
3× Shielded Ethernet LAN Ports
EAP215-Bridge & EAP211-Bridge: Gigabit EAP115-Bridge: 10/100Mbps
 |
 |
 |
 |
|
Model |
EAP215-Bridge KIT |
EAP211-Bridge KIT |
EAP115-Bridge KIT |
|
Frequency |
5 GHz |
||
|
Max Wireless Speed*1 |
AC867 Mbps |
AC867 Mbps |
N300 Mbps |
|
Max Transmission Distance*2 |
3.1 mi / 5 km |
0.62 mi / 1 km |
3.1 mi / 5 km |
|
Beamwidth (Vertical × Horizontal) |
35°×35° |
70°×70° |
35°×35° |
|
Antenna Gain |
11.0 dBi |
7.0 dBi |
11.0 dBi |
|
Ethernet Ports |
3× Gigabit |
3× Gigabit |
3× 10/100 Mbps |
|
Power Supply Method |
12V DC / 24V Passive PoE (Passive PoE adapter included in the box) |
||
|
Mount |
Pole Mounting (Accessories included) |
||
|
Weatherproof Enclosure |
IP65 |
||
|
Operating Temperature |
-40℃~70℃ (-40℉~158℉) |
||
|
Lightning Protection |
6 kV (the access point and the included power adapter) |
||
|
Wind Resistance |
√ |
||
|
Centralized Cloud Management |
Omada App; Omada Cloud Web UI |
||
|
Standalone Management |
Omada App; Local Management Web UI |
||
*Maximum wireless signal rates are the physical rates derived from IEEE Standard 802.11 specifications. The max ranges of products are tested in real outdoor environments. Actual range and throughput are not guaranteed and will vary as a result of network conditions, and depend on the transmission power and environmental factors such as wireless interference, obstacles, weather, etc.
| 硬體規格 | |
|---|---|
| 連接介面 | 3x Gigabit 乙太網路連接埠 |
| 按鈕 | 重置 |
| DIP Switch | 角色切換開關 |
| 電源供應 | 12V DC / 802.3af PoE / 24V 被動式 PoE (包裝內含被動式 PoE 供電) |
| 功耗 | 11.5W |
| 尺寸(長 x 寬 x 高) | 79 × 60 × 224 毫米(mm) |
| 天線 | 內建 2×2 雙極化指向型 MIMO 天線 5 GHz：10.0 dBi 水平：60°，垂直：30° |
| 防風雨外殼 | IP65 |
| 安裝 | 桿式安裝和壁掛安裝（含桿式安裝配件） |
| 無線網路規格 | |
|---|---|
| 覆蓋範圍 | 1 公里* |
| 無線網路標準 | IEEE 802.11 a/n/ac |
| 無線網路頻率 | 5 GHz |
| 訊號速率 | 5 GHz: 高達 867 Mbps§ |
| 無線網路功能 | • MU-MIMO: 5G 2x2 MU-MIMO DL • Multiple SSIDs:8 • 無線統計 • 無線排程 • 重啟排程 • RADIUS Accounting • 固定 IP / 浮動 IP • 速率限制 • 訪客網路 • 啟用/停用 無線廣播 • 啟用/停用 SSID 廣播 |
| 無線網路安全性 | • VLAN • 非法 AP 偵測 • MAC 過濾最大值：4,000 • 無線加密 |
| 傳輸功率 | • CE: <23dBm (5 GHz, band 1/2, EIRP);<30dBm (5 GHz, band3, EIRP)• FCC: <23dBm (5 GHz, band1)<25dBm (5 GHz, band4) |
| 管理功能 | |
|---|---|
| Omada App | 支援 |
| Restore & Backup | 支援 |
| 透過網頁更新韌體 | 支援 |
| NTP | 支援 |
| 集中化管理 | • Omada 雲端控制器 • Omada 硬體控制器 • Omada 軟體控制器 |
| 雲端存取 | 支援，需要搭配 Omada 控制器使用。 |
| E-mail警示 | 支援 |
| LED 開/關 控制 | 支援 |
| SNMP | 支援 |
| SSH | 支援 |
| Web管理介面 | 支援 |
| 零接觸監管 | 支援 |
| 其他規格 | |
|---|---|
| 認證 | CE, FCC, RoHS, NCC, BSMI |
| 包裝內容 | • EAP211-Bridge KIT • 安裝手冊 • 壁掛配件 • 被動 PoE 供電 |
| Lightning Protection | • 空氣放電：±8kV • 接觸放電：±4kV • Common mode 10/700：±6kV |
| 環境 | • 運作溫度：-40 °C–70 °C (-40 °F–158 °F); • 存放溫度：-40 °C–70 °C (-40 °F–158 °F); • 運作濕度：10%–90% non-condensing; • 存放濕度：5%–90% non-condensing |
1. Maximum wireless transmission rates are the physical rates derived from IEEE Standard 802.11 specifications. Range and coverage specifications, along with the number of connected devices, were defined according to test results under normal usage conditions. Actual wireless transmission rate, wireless coverage, and number of connected devices are not guaranteed and will vary as a result of 1) environmental factors, including building materials, physical objects, and obstacles; 2) network conditions, including local interference, volume and density of traffic, product location, network complexity, and network overhead; and 3) client limitations, including rated performance, location, connection quality, and client condition.
2. All products are tested in real outdoor environments. Actual range and throughput depend on the transmission power and environmental factors such as wireless interference, obstacles, weather, etc.
3. Protection against lightning and electro-static discharge may be achieved through proper product setup, grounding, and cable shielding. Refer to the instruction manual and consult an IT professional to assist with setting up this product.
4. These functions require the use of an Omada SDN controller.
5. Coverage value is calculated based on laboratory testing. Actual coverage is not guaranteed and will vary as a result of client limitations and environmental factors.
6. Non-Omada devices connected to the wired LAN ports will not be recognized by the Omada controllers, preventing users from viewing their connection status. To address this issue, connect those non-Omada devices to an Omada switch that links to the bridge's wired LAN ports.