SG3452XP

Omada 48-Port Gigabit and 4-Port 10GE SFP+ L2+ Managed Switch with 48-Port PoE+

  • 4× 10 Gbit/s SFP+-Steckplätze
  • 48× Gigabit-802.3af/at-PoE+-Ports
  • 500 W Gesamt-PoE-Budget mit bis zu 30 W PoE-Ausgangsleistung pro Port*
  • Zentrale Cloud-Verwaltung über das Internet oder die Omada-App
  • Standalone-Verwaltung über Web, CLI, SNMP und RMON
  • Statisches Routing hilft bei der Weiterleitung des internen Datenverkehrs für mehr Effizienz
  • VLAN, ACL, QoS, IGMP-Snooping, OAM und DDM
  • ERPS unterstützt schnellen Schutz und schnelle Wiederherstellung in einer Ringtopologie
  • Robustes Metallgehäuse und rackmontierbares Design

Erfahren Sie mehr über Omada Cloud SDN>​

Erfahren Sie mehr über die Omada Multi-Gig-Technologie >

Erfahren Sie mehr über die Omada PoE-Technologie >

TP-Link | Omada POE

Omada 48-Port Gigabit
und 4-Port 10GE SFP+
L2+ Managed Switch
mit 48-Port PoE+

SG3452XP

  •  

    4× 10 Gbit/s
    SFP+-Slots

  •  

    48× Gigabit
    PoE+ Ports

  •  

    500 W insgesamt
    PoE-Budget*

  •  

    Zentralisierte
    Verwaltung


  •  

    Omada
    App

  •  

    Zero-Touch
    Bereitstellung

  •  

    Ethernet-Ring
    Schutzumschaltung

  •  

    Statisches
    Routing

Einfacher Aufbau eines kompletten 10G-Multi-Gigabit-Netzwerks

  •  

    10G-Router

    Sorgt für schnelle Verbindungen

  •  
  •  

    Vollwertiger 10G-Glasfaser-Switch

    Blitzschnelle Aggregationsvermittlung

Software Defined Networking (SDN) mit Cloud-Zugriff

Verwalten Sie Ihre Access Points, Switches und Gateways an mehreren Standorten über eine einzige Schnittstelle.

Ceiling Mount AP
Wall Plate AP
Outdoor AP
Omada PoE Switch
Omada VPN Gateway
Cloud Access
On-premises Controllers
Omada Hardware
Controller
Oder
Omada Software
Controller
Oder
Omada Cloud-basierter
Controller

(Abonnement erforderlich)
Internet
Webbrowser
Omada App

Mehrere Anwendungsszenarien

  •  

    Überwachung

    Funktioniert mit IP-Kameras

  •  

    Telefonkonferenz

    Funktioniert mit IP-Telefonen

  •  

    Wi-Fi-Abdeckung

    Funktioniert mit Access Points

  •  

    Kabelgebundene Verbindungen

    Funktioniert mit Nicht-PoE-Geräten wie PCs und Druckern

HARDWARE-FUNKTIONEN

Schnittstelle • 48× 10/100/1000 Mbps RJ45 PoE+ Ports
• 4× 10G SFP+ Slots
• 1× RJ45 Console Port
• 1× Micro-USB Console Port
Anzahl Lüfter 3
Physischer Diebstahlschutz
Spannungsversorgung 100-240 V AC~50/60 Hz
PoE-Ports • Standard: 802.3at/af compliant
• PoE+ Ports: 48 Ports (up to 30 W PoE Output per Port)
• Power Budget: 500 W*
Abmessungen (B*T*H) 17.3 × 13.0 × 1.7 in (440 × 330 × 44 mm)
Montage Rack Mountable
Maximale Leistungsaufnahme • 49.19 W (110V/60Hz) ( no PD device connected)
• 635.7 W (110V/60Hz) ( with 500 W PD device connected)
Maximale Wärmeabgabe • 167.85 BTU/hr (110 V/60 Hz) (no PD connected)
• 2169.2 BTU/hr (110 V/60 Hz) (with 500 W PD connected)

PERFORMANCE

Switchingkapazität 176 Gbps
Paketweiterleitungsrate 130.9 Mpps
MAC-Adresstabelle 16 K
Paketpufferspeicher 12 Mbit
Jumbo-Frames 9 KB

SOFTWARE-FUNKTIONEN

Quality of Service • 8 priority queues
• 802.1p CoS/DSCP priority
• Queue scheduling
- SP (Strict Priority)
- WRR (Weighted Round Robin)
- SP+WRR
• Bandwidth Control
- Port/Flow based Rating Limiting
• Smoother Performance
• Action for Flows
- Mirror (to supported interface)
- Redirect (to supported interface)
- Rate Limit
- QoS Remark
Layer3-Funktionen • 16 IPv4/IPv6 Interfaces
• Static Routing
- 48 static routes
• Static ARP
- 128 Static Entries
• Proxy ARP
• Gratuitous ARP
• DHCP Server
• DHCP Relay
- DHCP Interface Relay
- DHCP VLAN Relay
• DHCP L2 Relay
Layer2- und Layer2+-Funktionen • Link Aggregation
- static link aggregation
- 802.3ad LACP
- Up to 8 aggregation groups, containing 8 ports per group
• Spanning Tree Protocol
- 802.1d STP
- 802.1w RSTP
- 802.1s MSTP
- STP Security: TC Protect, BPDU Filter, Root Protect
• Loopback Detection
- Port based
- VLAN based
• Flow Control
- 802.3x Flow Control
- HOL Blocking Prevention
• Mirroring
- Port Mirroring
- CPU Mirroring
- One-to-One
- Many-to-One
- Tx/Rx/Both
Layer2-Multicast • IGMP Snooping
- IGMP v1/v2/v3 Snooping
- Fast Leave
- IGMP Snooping Querier
- IGMP Authentication
• IGMP Authentication
• MLD Snooping
- MLD v1/v2 Snooping
- Fast Leave
- MLD Snooping Querier
- Static Group Config
- Limited IP Multicast
• MVR
• Multicast Filtering: 256 profiles and 16 entries per profile
Erweiterte Funktionen • Automatic Device Discovery
• Batch Configuration
• Batch Firmware Upgrading
• Intelligent Network Monitoring
• Abnormal Event Warnings
• Unified Configuration
• Reboot Schedule
VLAN • VLAN Group
- Max 4K VLAN Groups
• 802.1Q Tagged VLAN
• MAC VLAN: 30 Entries
• Protocol VLAN: Protocol Template 16, Protocol VLAN 16
• Private VLAN
• GVRP
• VLAN VPN (QinQ)
- Port-Based QinQ
- Selective QinQ
• Voice VLAN
Zugriffskontrollliste • Time-based ACL
• MAC ACL
- Source MAC
- Destination MAC
- VLAN ID
- User Priority
- Ether Type
• IP ACL
-Source IP
- Destination IP
- Fragment
- IP Protocol
- TCP Flag
- TCP/UDP Port
- DSCP/IP TOS
- User Priority
• Combined ACL
• Packet Content ACL
• IPv6 ACL
• Policy
- Mirroring
- Redirect
- Rate Limit
- QoS Remark
• ACL apply to Port/VLAN
Sicherheit • IP-MAC-Port Binding
- 512 Entries
- DHCP Snooping
- ARP Inspection
- IPv4 Source Guard: 100 Entries
• IPv6-MAC-Port Binding
- 512 Entries
- DHCPv6 Snooping
- ND Detection
- IPv6 Source Guard: 100 Entries
• DoS Defend
• Static/Dynamic Port Security
- Up to 64 MAC addresses per port
• Broadcast/Multicast/Unicast Storm Control
- kbps/ratio control mode
• 802.1X
- Port base authentication
- Mac base authentication
- VLAN Assignment
- MAB
- Guest VLAN
- Support Radius authentication andaccountability
• AAA (including TACACS+)
• Port Isolation
• Secure web management through HTTPS with SSLv3/TLS 1.2
• Secure Command Line Interface (CLI) management with SSHv1/SSHv2
• IP/Port/MAC based access control
IPv6 • IPv6 Dual IPv4/IPv6
• Multicast Listener Discovery (MLD) Snooping
• IPv6 ACL
• IPv6 Interface
• Static IPv6 Routing
• IPv6 neighbor discovery (ND)
• Path maximum transmission unit (MTU) discovery
• Internet Control Message Protocol (ICMP) version 6
• TCPv6/UDPv6
• IPv6 applications
- DHCPv6 Client
- Ping6
- Tracert6
- Telnet (v6)
- IPv6 SNMP
- IPv6 SSH
- IPv6 SSL
- Http/Https
- IPv6 TFTP
MIBs • MIB II (RFC1213)
• Interface MIB (RFC2233)
• Ethernet Interface MIB (RFC1643)
• Bridge MIB (RFC1493)
• P/Q-Bridge MIB (RFC2674)
• RMON MIB (RFC2819)
• RMON2 MIB (RFC2021)
• Radius Accounting Client MIB (RFC2620)
• Radius Authentication Client MIB (RFC2618)
• Remote Ping, Traceroute MIB (RFC2925)
• Support TP-Link private MIB

VERWALTUNG

Omada App Yes. Requiring the use of OC300, OC200, Omada Cloud-Based Controller, or Omada Software Controller.
Centralized Management • Omada Cloud-Based Controller
• Omada Hardware Controller (OC300)
• Omada Hardware Controller (OC200)
• Omada Software Controller
Cloud Access Yes. Requiring the use of OC300, OC200, Omada Cloud-Based Controller, or Omada Software Controller.
Zero-Touch Provisioning Yes. Requiring the use of Omada Cloud-Based Controller.
Management Features • Web-based GUI
• Command Line Interface (CLI) through the console port, telnet
• SNMP v1/v2c/v3
- Trap/Inform
- RMON (1,2,3,9 groups)
• SDM Template
• DHCP/BOOTP Client
• 802.1ab LLDP/LLDP-MED
• DHCP AutoInstall
• Dual Image, Dual Configuration
• CPU Monitoring
• Cable Diagnostics
• EEE
• Password Recovery
• SNTP
• System Log

SONSTIGES

Zertifizierung CE, FCC, RoHS
Verpackungsinhalt • TL-SG3452XP Switch
• Power Cord
• Quick Installation Guide
• Rackmount Kit
• Rubber Feet
Systemanforderungen Microsoft® Windows® 98SE, NT, 2000, XP, Vista™ or Windows 7/8/10/11, MAC® OS, NetWare®, UNIX® or Linux.
Umgebung • Operating Temperature: 0–40 ℃ (32–104 ℉);
• Storage Temperature: -40–70 ℃ (-40–158 ℉)
• Operating Humidity: 10–90% RH non-condensing
• Storage Humidity: 5–90% RH non-condensing

Diese Funktionen erfordern die Verwendung des Omada SDN Controllers. Zero-Touch-Provisioning erfordert die Verwendung des Omada Cloud-basierten Controllers. Unter Omada Cloud-basierte Controller – Produktliste finden Sie alle Modelle, die vom Omada Cloud-basierten Controller unterstützt werden.

*Die PoE-Budgetberechnungen basieren auf Labortests. Das tatsächliche PoE-Leistungsbudget kann nicht garantiert werden und variiert aufgrund von Client-Einschränkungen und Umgebungsfaktoren.

**ISP-Funktionen können nur im Standalone-Modus konfiguriert werden. 

Achtung: Es wird empfohlen, nur ein SM5310-T (TL-SM5310-T) Modul für den SG3452XP zu verwenden.