POE20E-Outdoor
Omada PoE+ Extender
- 2× 10/100/1000 Mbps RJ45 ports
- Compliance with 802.3af/at devices
- Supplies up to 30 W, which meets the power consumption requirements of most IP cameras
- Extends a PoE/PoE+ network connection to 200 m (100 m+100 m)/500 m (250 m+250 m)* from the PoE power sourcing equipment
- Plug-and-Play, requires no configure
What This Product Does
The Gigabit Outdoor PoE+ Extender is designed to extend the data transmission distance between PoE power sourcing equipment and PoE powered devices. It can be used with 802.3af/at-compliant devices, which is very suitable for long-distance wiring requirements in surveillance scenarios.
| HARDWARE FEATURES | |
|---|---|
| Standards and Protocols | IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at |
| Interface | • 1× 10/100/1000 Mbps Auto-Negotiation RJ45• 1× 10/100/1000 Mbps Auto-Negotiation RJ45 |
| Network Media | •10BASE-T: 2-pair UTP/STP (≤250m) of Cat. 3 or above•100BASE-TX: 2-pair UTP/STP (≤100m) of Cat. 5 or above•1000BASE-T: 4-pair UTP/STP (≤100m) of Cat. 5e or above |
| Max. Power Consumption | • Output: 30W |
| LED | 2× Link/Act |
| Dimensions ( W x D x H ) | 221.7x31x31.5mm (8.73x1.22x1.24 in) |
| Weatherproof Enclosure | IP68 |
| OTHERS | |
|---|---|
| Certification | CE, FCC, BSMI, KC |
| Package Content | • POE20E-Outdoor• Power Cord• Installation Guide |
| Environment | • Operating Temperature: -40°C to 65°C (-40°F to 149°F)• Storage Temperature: -40°C to 70°C (-40°F to 158°F)• Operating Humidity: 15% to 90% RH non-condensing• Storage Humidity: 15% to 90% RH non-condensing |
* POE20E-Outdoor features an adaptive data rate design. Link stability may be affected by cable length, cable quality, and the characteristics of the connected devices. Under certain conditions—such as using 160–170m Cat5e cables (tested in lab environments)—intermittent connectivity may occur. To resolve this issue(1) Manually conffgure the connected device to operate at 10 Mbps full-duplex or enable Extend Mode on the PSE, or (2) Adjust the cable length to avoid the affected range.