Table of Contents
Tapo C260_Installation and User Guide
About This Guide
This guide provides a brief introduction to the Indoor Pan/Tilt Security Camera and the Tapo app, as well as regulatory information. Please note that features available in Tapo may vary by model and software version. Tapo availability may also vary by region. All images, steps, and descriptions in this guide are only examples and may not reflect your actual Tapo Camera experience.
Conventions
In this guide, the following convention is used:
| Convention | Description |
|---|---|
| Blue | Key information appears in blue, including management page text such as menus, items, buttons and so on. |
| Underline | Hyperlinks are in blue and underlined. You can click to redirect to a website. |
| Note |
Ignoring this type of note might result in a malfunction or damage to the device. |
More Info
Specifications can be found on the product page at https://www.tapo.com.
Our Technical Support and troubleshooting information can be found at https://www.tapo.com/support/.
The setup video can be found at https://www.tp-link.com/support/setup-video/#cloud-cameras.
Introduction
4K Clarity. AI-Powered Security.
Monitor your home with 4K clarity. Introduction The Indoor Pan/Tilt AI Security Camera helps you add security to your home wherever and whenever. It recognizes individuals by their faces, sending alerts only when an unfamiliar face is detected. Supports 18× digital zoom for superior clarity. See more. See clearer. Stay secure.

· Reveal What Other Cameras Miss: 4K video resolution captures extraordinary detail. See critical details clearly, even at up to 18× zoom.
· Keeps Activity Front and Center: 360° pan and tilt coverage automatically locks onto and follows movement. Important events stay in frame.
· Smarter Alerts, Fewer Distractions: AI-powered detection identifies familiar faces and pets that come into frame, reducing unnecessary notifications from irrelevant activity.
· Color Night Vision: The starlight sensor and built-in spotlights helps provide colorful nighttime footage, making it easier to see important details after dark.
· Naptime-Friendly Night Vision: Invisible night vision keeps an eye on your sleeping baby without the distraction of visible red lights, while baby crying alerts notify you when your attention is needed.
· Privacy You Can See and Control: Enable Physical Privacy Mode to completely block the lens and create custom privacy zones to keep sensitive areas out of view and blocked from monitoring.
· Local and Cloud Storage: Save recorded videos on a microSD Card (up to 512 GB, purchased separately) or use Tapo Care cloud storage services (subscribe separately).

Learn more about microSD card compatibility
Appearance
1. Status LED
2. Microphone
3. Lens
4. Speaker
5. USB Type-C Port
6. RESET Button: Press and hold for 5 seconds: Reset Wi-Fi settings. Press and hold for 10 seconds: Reset to factory settings.
7. microSD Card Slot: Insert a microSD card (not included) and initialize it on the Tapo app for local recording.

LED Indication
| LED Status | Indication |
|---|---|
| Solid red | Starting up |
| Blinking red and green | Ready for setup |
| Blinking red slowly | Connecting to Wi-Fi |
| Solid amber | Connected to Wi-Fi |
| Solid green | Connected to the cloud |
| Blinking red quickly | Camera resetting |
| Blinking green quickly | Camera updating |
Set Up Your Camera
Follow the steps below to get started with your new camera.
Step 1. Download Tapo App
Get the Tapo app from the App Store or Google Play, or by scanning the QR code below.

Step 2. Log In
Open the app, and log in with your TP-Link ID. If you don't have an account, create one first.
Step 3. Add Your Camera
Tap the + button in the app and search for your model. Follow app instructions to set up your camera.

Install a microSD Card
Follow the steps below to install the microSD card for local recording.
You can go to the Settings page in the Tapo app to check the card status or format your card.
1. Tilt the lens up to find the microSD card slot.
2. Identify the direction of the microSD card and carefully insert the card into the slot. Push in the card until you hear a clicking sound.

Mount Your Camera
When you finish adding your camera to the Tapo app, you can mount it to the wall or ceiling.
Option 1: Wall Mounting
1. Drill Holes
Place the mounting template sticker where you want the camera. Then drill two holes through two circles.

2. Install the Bracket
Insert two anchors into the holes and use the screws to affix the bracket over the anchors.

3. Secure the Camera
Align the snap fit and slide the camera onto the bracket from outside in until it clicks into place.
Route the USB cable under the buckle on the bracket.

Note: The camera's base must be flush with the bracket before sliding it in.
If tilting occurs (as shown), remove the camera and reinstall it correctly.

Option 2: Ceiling Mounting
1. Drill Holes
Place the mounting template sticker where you want the camera. Then drill two holes through two circles.

2. Install the Bracket
Insert two anchors into the holes and use the screws to affix the bracket over the anchors.

![]() |
|---|
3. Secure the Camera
Align the snap fit and slide the camera onto the bracket from outside in until it clicks into place. Route the USB cable under the buckle on the bracket.

Note: The camera's base must be flush with the bracket before sliding it in.
If tilting occurs (as shown), remove the camera and reinstall it correctly.

Reset Your Camera
Follow the steps below to reset your camera via the RESET button.
You can also go to the camera's Settings page in the Tapo app and tap Remove Device at the bottom to factory reset your camera.
Press and hold the RESET button for 10 seconds to reset the camera.

Support
For technical support, the user guide, FAQs, warranty and more, please visit https://www.tapo.com/support/

Authentication
FCC compliance information statement

Product Name: Indoor Pan/Tilt Security Camera
Model Number: Tapo C260
Responsible Party:
TP-Link Systems Inc.
Address: 5 Peters Canyon Road, Suite 300, Irvine, CA 92606
Website: http://www.tp-link.com/us/
Tel: +1 626 333 0234
Fax: +1 909 527 6804
E-mail: sales.usa@tp-link.com
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.
“To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.”
We, TP-Link Systems Inc., has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.
Issue Date: 2026-10-13
FCC compliance information statement
Product Name: I.T.E. Power Supply
Model Number: A8A-050200U-US1
Responsible Party:
TP-Link Systems Inc.
Address: 5 Peters Canyon Road, Suite 300, Irvine, CA 92606
Website: http://www.tp-link.com/us/
Tel: +1 626 333 0234
Fax: +1 909 527 6804
E-mail: sales.usa@tp-link.com
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
We, TP-Link Systems Inc., has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.
Issue Date: 2026-10-13
Canadian Compliance Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
1) L’appareil ne doit pas produire de brouillage;
2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
Caution: The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; DFS (Dynamic Frequency Selection) products that operate in the bands 5250- 5350 MHz, and 5470-5725 MHz.
Avertissement: Le dispositif fonctionnant dans la bande 5150-5250 MHz est réservé uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux; Les produits utilisant la technique d'atténuation DFS (sélection dynamique des fréquences) sur les bandes 5250- 5350 MHz et 5470-5725 MHz.
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Déclaration d’exposition aux radiations:
Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.
Industry Canada Statement
CAN ICES-003 (B)/NMB-003(B)
CE Mark Warning

OPERATING FREQUENCY (the maximum transmitted power)
2402MHz—2480MHz (10dBm)
2412MHz-2472MHz (20dBm)
5150 MHz -5250 MHz (23dBm)
5250 MHz -5350 MHz (23dBm)
5470 MHz -5725 MHz (23dBm)
5725 MHz -5850 MHz (14dBm)
EU Declaration of Conformity
TP-Link hereby declares that Indoor Pan/Tilt Security Camera is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.
The original EU Declaration of Conformity may be found at https://www.tapo.com/en/support/ce/
RF Exposure Information
This device meets the EU requirements (2014/53/EU Article 3.1a) on the limitation of exposure of the general public to electromagnetic fields by way of health protection.
The device complies with RF specifications when the device used at 20 cm from your body.
National Restrictions
Frequency band: 5150 - 5250 MHz:
Indoor use: Inside buildings only. Installations and use inside road vehicles and train carriages are not permitted. Limited outdoor use: If used outdoors, equipment shall not be attached to a fixed installation or to the external body of road vehicles, a fixed infrastructure or a fixed outdoor antenna. Use by unmanned aircraft systems (UAS) is limited to within the 5170 - 5250 MHz band.
Frequency band: 5250 - 5350 MHz:
Indoor use: Inside buildings only. Installations and use in road vehicles, trains and aircraft are not permitted. Outdoor use is not permitted.
Frequency band: 5470 - 5725 MHz:
Installations and use in road vehicles, trains and aircraft and use for unmanned aircraft systems (UAS) are not permitted.

UKCA Mark

UK Declaration of Conformity
TP-Link hereby declares that the Indoor Pan/Tilt Security Camera is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017.
The original UK Declaration of Conformity may be found at https://www.tapo.com/support/ukca/.
National Restrictions
Attention: This device may only be used indoors in Great Britain.
Korea Warning Statements:
해당 무선설비는 운용중 전파혼신 가능성이 있음.
NCC Notice & BSMI Notice
注意!
取得審驗證明之低功率射頻器材,非經核准,公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。
低功率射頻器材之使用不得影響飛航安全及干擾合法通信;經發現有干擾現象時,應立即停用,並改善至無干擾時方得繼續使用。
前述合法通信,指依電信管理法規定作業之無線電通信。
低功率射頻器材須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。
應避免影響附近雷達系統之操作。
為避免本器材影像畫面遭偷窺或擷取,本器材使用者應先修改預設密碼,並定期更新密碼。
安全諮詢及注意事項
請使用原裝電源供應器或只能按照本產品注明的電源類型使用本產品。
清潔本產品之前請先拔掉電源線。請勿使用液體、噴霧清潔劑或濕布進行清潔。
注意防潮,請勿將水或其他液體潑灑到本產品上。
插槽與開口供通風使用,以確保本產品的操作可靠並防止過熱,請勿堵塞或覆蓋開口。
請勿將本產品置放於靠近熱源的地方。除非有正常的通風,否則不可放在密閉位置中。
不要私自拆開機殼或自行維修,如產品有故障請與原廠或代理商聯繫。
注意:請勿更換規格不正確的電池, 以免導致產品內的安全防護機制失效。請勿将電池丢入火中或烤箱中或使用機器擠壓/切割電池,以避免導致爆炸。
本設備只能由輸出符合 IEC 62368-1 中定義的 2 類電源 (PS2) 或有限電源 (LPS) 的設備供電。
產品外接電源供應器供電時,需使用BSMI認證的電源供應器且用於室内,並符合如下規格要求: 輸出5Vdc, 至少2A,符合LPS/PS2, 操作溫度至少符合35°C
門鈴溫度: -20°C ~ 45°C (-4°F ~ 113°F)
限用物質含有情況標示聲明書
| 設備名稱:Indoor Pan/Tilt Security Camera 型號(型式):Tapo C260 Equipment name Type designation (Type) |
||||||
|---|---|---|---|---|---|---|
| 單元 Unit |
限用物質及其化學符號 Restricted substances and its chemical symbols |
|||||
| 鉛 Lead (Pb) |
汞 Mercury (Hg) |
鎘 Cadmium (Cd) |
六價鉻 Hexavalent chromium (Cr+6) |
多溴聯苯 Polybrominated biphenyls (PBB) |
多溴二苯醚 Polybrominated diphenyl ethers (PBDE) |
|
| PCB | ○ | ○ | ○ | ○ | ○ | ○ |
| 外殼 | ○ | ○ | ○ | ○ | ○ | ○ |
| 電源供應器 | − | ○ | ○ | ○ | ○ | ○ |
| 其他及其配件 | − | ○ | ○ | ○ | ○ | ○ |
| 備考1.〝超出0.1 wt %〞及〝超出0.01 wt %〞係指限用物質之百分比含量超出百分比含量基準值 Note 1:“Exceeding 0.1 wt %” and “exceeding 0.01 wt %” indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition. 備考2.〝○〞係指該項限用物質之百分比含量未超出百分比含量基準值。 Note 2:“○” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence. 備考3.〝-〞係指該項限用物質為排除項目。 Note 3:The “−” indicates that the restricted substance corresponds to the exemption. |
||||||

Продукт сертифицировано згідно с правилами системи УкрСЕПРО на відповідність вимогам нормативних>Продукт сертифіковано згідно с правилами системи УкрСЕПРО на відповідність вимогам нормативних документів та вимогам, що передбачені чинними законодавчими актами України.

Safety Information
• Keep the device away from water, fire, humidity or hot environments.
• Adapter shall be easily accessible.
• Never touch the product with wet hands.
• Do not disassemble, repair or modify the product.
• Do not use damaged power supplies or USB cable.
• Use only power supplies listed in the user instructions. Refer to the User Manual on the product support page. Do not use any other power supplies than those recommended.
• Do not use the product if the casing has been broken. Danger of electric shock.
• For indoor use only.
• Do not use liquid to clean the product. Only use a dry cloth.
• Never put metal objects inside the product. If a metal object enters the product turn off the circuit breaker and contact an authorised electrician.
• The product should be kept free from excessive smoke, dust or high temperature and vibration.
• This product should not be exposed to direct sunlight
• Do not place heavy objects on top of the product.
• When you leave the product unused for a long time, unplug the product from the power outlet.
• Do not use the device where wireless devices are not allowed.
• Do not place near automatically controlled devices such as fire alarms. Radio waves emitted from this product may cause such devices to malfunction resulting in an accident.
• Observe restrictions on using wireless products in fuel depots, chemical plants or when blasting operations are in progress.
• This product is not intended to be used when providing medical care. Consult the manufacturer of any personal medical devices, such as pacemakers or hearing aids to determine if they are adequately shielded from external RF (radio frequency) energy.
• Do not use this product in health care facilities. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.
• This product may interfere with other electronic products such as TV, radios, personal computers, phones or other wireless devices.
• Operating Temperature: 0 ºC ~ 40 ºC (32 °F ~ 104 °F)
Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.
This product uses radios and other components that emit electromagnetic fields. Electromagnetic fields and magnets may interfere with pacemakers and other implanted medical devices. Always keep the product and its power adapter more than 15 cm (6 inches) away from any pacemakers or other implanted medical devices. If you suspect your product is interfering with your pacemaker or any other implanted medical device, turn off your product and consult your physician for information specific to your medical device.
Use only the power supplies listed below.
| Manufacturer | Model |
|---|---|
|
Aohai |
A8A |
|
Aohai |
A209 |
|
DEE VAN |
FAU 050200 |
|
DEE VAN |
FIN 050200a |
|
DEE VAN |
FKA 050200 |
|
DEE VAN |
FUK |
Explanation of the symbols on the product label
Note: The product label is on the bottom of the product and its power supply. Symbols may vary from products.
注意:產品標籤位於產品及其電源的底部。符號可能因產品而異。
| Symbol 符號解釋 |
Explanation 解釋 |
|---|---|
![]() |
Class II equipment Class II 設備 |
![]() |
Class II equipment with functional earthing 具有功能接地的Class II 設備 |
![]() |
Alternating current 交流電 |
![]() |
DC voltage 直流電壓 |
![]() |
Polarity of output terminals 輸出端子極性 |
![]() |
Indoor use only 僅限室內使用 |
![]() |
Dangerous voltage 危險電壓 |
![]() |
Caution, risk of electric shock 注意,有觸電危險 |
| |
Energy efficiency Marking 能源效率標示 |
![]() |
Protective earth 保護地線 |
![]() |
Earth 地線 |
![]() |
Frame or chassis 機架接地 |
![]() |
Functional earthing 功能地線 |
![]() |
Caution, hot surface 警告,表面高溫 |
![]() |
Caution 警告 |
![]() |
Operator’s manual 操作手冊 |
![]() |
Stand-by 待機 |
![]() |
“ON”/”OFF” (push-push) 「開」/「關」 ( 按壓式) |
![]() |
Fuse 保險絲 |
![]() |
Fuse is used in neutral N 保險絲用於中性線N |
![]() |
RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment. 回收利用 本產品標示有「廢棄電氣電子設備(WEEE)」的分類回收標誌。這表示本產品必須依據歐盟指令 2012/19/EU 進行妥善回收或拆 解,以減少對環境的影響。 使用者可選擇將本產品交給合格的回收機構,或在購買新電器或電子設備時,交回給零售商進行回收處理。 |
![]() |
Caution, avoid listening at high volume levels for long periods 注意,避免長時間以高音量收聽 |
![]() |
Disconnection, all power plugs 斷開所有電源插頭 |
| m | Switch of mini-gap construction 微間隙結構的開關 |
| µ | Switch of micro-gap construction (for US version) Switch of micro-gap / micro-disconnection construction (for other versions except US) 微小間隙結構開關(適用於美國版) 微小間隙 / 微小斷開結構開關(適用於美國以外的其他版本) |
| ε | Switch without contact gap (Semiconductor switching device) 無接點間隙開關(半導體開關裝置) |






















