_normal_20250208084631s.jpg)
1.0_100_Mbps_WDM_Media_Converter_02_Year_Warranty_normal_20220421022732f.jpg)
1.0_100_Mbps_WDM_Media_Converter_03_normal_20220421022754j.jpg)
1.0_100_Mbps_WDM_Media_Converter_04_normal_20220421022813w.jpg)
1.0_100_Mbps_WDM_Media_Converter_05_normal_20220421022823f.jpg)
1.0_100_Mbps_WDM_Media_Converter_06_normal_20220421022833x.jpg)
_large_20250208084631j.jpg)
1.0_100_Mbps_WDM_Media_Converter_02_Year_Warranty_large_20220421022732p.jpg)
1.0_100_Mbps_WDM_Media_Converter_03_large_20220421022754p.jpg)
1.0_100_Mbps_WDM_Media_Converter_04_large_20220421022813m.jpg)
1.0_100_Mbps_WDM_Media_Converter_05_large_20220421022823l.jpg)
1.0_100_Mbps_WDM_Media_Converter_06_large_20220421022833f.jpg)
TL-FC111A-20
End of Life10/100 Mbps WDM Media Converter
- Complies with 802.3u 10/100Base-TX, 100Base-FX standards
- Auto-negotiation of Half-Duplex/Full-Duplex transfer mode
- 9/125 μm SMF (Single-Mode Fiber)
- Bidirectional WDM communication on a single fiber
- Ranges up to 20km (12.4 miles)
- Work with TL-FC111B-20 as a pair
What This Product Does
TL-FC111A-20 is a 100M media converter, providing a 100M RJ-45 port and a 100M SC fiber port, which can convert between electrical and optical signals. And long-distance data transmission through optical fiber can be applied to commercial scenarios such as park security monitoring and wireless networking.
How This Product Works
TL-FC111A-20 adopts WDM (wavelength division multiplexing) technology, helping send and receive data at a distance of up to 20km (12.4 miles) over only one fiber, which saves half of the cable deployment cost for customers. TL-FC111A-20 transmits data at 1550nm wavelength and receives data at 1310nm wavelength on optical fiber. The TL-FC111A-20 works in the other end as a pair by receiving data at wavelength 1550nm and sending data at wavelength 1310nm.
_normal_20250208085127t.png)
| Standards and Protocols | IEEE802.3, IEEE802.3i, IEEE802.3u |
|---|---|
| Interface | • 1× 100 Mbps SC Fiber Port• 1× 10/100 Mbps RJ45 Port (Auto MDI/MDIX) |
|---|---|
| Network Media | 100BASE-Tx: 2-pair UTP/STP of Cat. 5 or above (≤100 m) |
| Power Supply | External Power Adapter: 5 V/0.6 A |
| LED | PWR, Link/Act |
| Wave Length | 1550 nm TX, 1310 nm RX |
| Dimensions ( W x D x H ) | 94.5*73*27 mm |
| Standards and Protocols | IEEE 802.3, IEEE 802.3i, IEEE802.3u |
|---|---|
| Basic Function | Auto-negotiation of half-duplex / full-duplex transfer mode Full-duplex flow control (IEEE 802.3x) Half-duplex flow control (Backpressure) Extends fiber distance up to 20km (12.4 miles) |
| Interface | 1x 100M single SC/UPC port 1x 10/100M RJ45 port (Auto MDI/MDIX) |
| WDM TX | 1550 nm |
| WDM RX | 1310 nm |
| Network Media 10BASE-T | UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) |
| Network Media 100BASE-T | UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) |
| Network Media 100BASE-FX | Single-mode fiber |
| Dimensions ( W x D x H ) | 3.7 × 2.9 × 1.1 in. (95 × 73 × 27 mm) |
| Power Supply | External Power Adapter: 5 V/0.6 A |
| LED | PWR, Link/Act |
| Safety & Emission | FCC, CE, RoHS |
| Fiber Type | 9/125 μm single-mode fber (≤20 km) |
| Environment | Operating Temperature: 0℃~50℃ (32℉~122℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing |
| Operating Temperature | 0˚C to 50˚C (32˚F to 122˚F) |
|---|---|
| Storage Temperature | -40˚C to 70˚C (-40˚F to 158˚F) |
| Operating Humidity | 10% to 90% RH non-condensing |
| Storage Humidity | 5% to 90% RH non-condensing |
| Package Content | • Media Converter TL-FC111A-20• Power Adapter• Installation Guide |
|---|---|